- Super waterproof, even if it is exposed to the outside in the rain, it will not affect at all.
- Two induction modes are available for selection, night mode and voice control mode, which are sensitive and can be set by simply pressing the button.
- Bevel Surface, Fast To Absorb Sunshine, Easy Install.
- High ConversionLow Energy Consumption, Energy Saving And Environmental Protection,120 Degrees, 3-5 Meters,Longer Sensing Distance.
- Large-capacity battery, long-time work, high-performance solar panels, charging during the day and lighting at night.
Sensor Light Outdoor Solar Light 20LED Solar Wall Lamp Waterproof PIR Motion Sensor Garden Light Solar Powered Sunlight Street lamp- 20 LED Light
Mode introduction:In low-light conditions (at night)
1. Automctic activation in low-light environments,no operation required (switch activation required for first use)
Under bright enviroment (daytime)
2.The ambient brightness is higher than 5LUX,and the light antering the sensing area is off,solar panels will also continue to charge
People moving lights in detection area
3.When a person enters the datection area,the infrared light of the human body is sensed,and the lamp will automatically light up.
People leave the detdction area
4.After a person leaves the detection area for a period of time,the light will automatically go out.
Advantage
1:Super waterproof, even if it is exposed to the outside in the rain, it will not affect at all.
2:Two induction modes are available for selection, night mode and voice control mode, which are sensitive and can be set by simply pressing the button.
3:Bevel Surface, Fast To Absorb Sunshine, Easy Install.
4:High ConversionLow Energy Consumption, Energy Saving And Environmental Protection,120 Degrees, 3-5 Meters,Longer Sensing Distance.
5:Large-capacity battery, long-time work, high-performance solar panels, charging during the day and lighting at night.
Parameter:
-Working time: 8-10 hours
-LED Number of lamp beads: 20 pcs
-Battery: 3.7V 1200mAh
-Solar panel: 5.5V 0.65W
-Waterproof index: IP 65
-Induction method: infrared human body induction
-Charging time: 6-8 hours of direct solar energy
-Temperature: -25 ℃ to 65 ℃ Product size: 96 * 124 * 48mm
-Control Shell material: pp + polycrystalline too energy board
-Working temperature: -25 ℃ to 65 ℃
Please Notice！！！
-Please place the product in direct sunlight and ensure that the solar panel is not blocked.
-Generally, the first use requires three hours of strong sunlight, and generally it can be fully exposed to 7 hours of sunlight
20LED are different, please pay attention to your choice when buying. Or you can consult us.
Packing List:
-1pcs Solar Light
-1pcs User’s Manual-Screws
Reviews
There are no reviews yet.